CLEANING THE PRINTER

If one of the following problems occurs, clean the printer parts outlined below.

Problem

Part to Clean

1 The paper does not feed properly

Paper feed roller

2The printer makes a rattling or grating noise during printing Shuttle shaft

3

Horizontal lines appear periodically on the printed image

Thermal heads

4

Vertical lines appear on the printed image

Platen glass

5

The original is not scanned properly

Document feed rollers, platen roller,

 

 

document eject rollers

PRINTER

thermal heads

shuttle shaft

heater element

paper feed roller

platen rubber cutter base

Paper feed rollers

Wipe with a soft cloth moistened with water. Wipe again with a soft, dry cloth.

Platen rubber/cutter base

Wipe with a soft, dry cloth.

 

 

 

10

 

Caution

 

Be careful not to damage the platen rubber.

 

Avoid wiping the platen rubber with alcohol or

 

 

other solvents.

 

 

 

 

 

 

Shuttle shaft

If the shaft becomes dirty, the printer will not function properly. Wipe the shaft carefully with a soft cloth.

Thermal heads

When the thermal heads have cooled (at least 2 minutes after the printer has been switched off) wipe the heater element vertically with a soft, dry cloth.

If the thermal heads are particularly dirty, apply a small amount of isopropyl alcohol to the cloth. (Never touch the print heads directly with your hands.)

32

Page 34
Image 34
FujiFilm 3000 manual Cleaning the Printer, Problem Part to Clean