CONTROL PANEL
10
9
2
3
7
6
8
2
1
4
5
Caution
Remove the protective covering from the control panel before use.
No. | Name |
1MESSAGE display
2PAPER TYPE key
3MODE key
4OUTPUT SIZE key
5CONTRAST key
6START/STOP key
7FEED key
8CLEAR key
9ONLINE lamp
10READY lamp
Function
The message display indicates the paper type and output color, mode, output size, contrast, and any operating/error messages.
Press the paper type key to set the type of paper installed in the printer (DTP, TTP, HDP). If the paper type is set incorrectly, contrast on the poster may be affected.
Press the mode key to set the desired mode (normal, photo, reverse).
Press the output size key to set the desired output size.
Press the contrast key to lighten or darken contrast in accordance with the input document.
Press the start/stop key to either start printing, or to stop the printing process midway.
Press the feed key to feed the paper through the printer (approximately 3"/77mm at a time).
The clear key is mainly used when printing in online mode. (Refer to the Interface Kit User's Guide.)
The printer is in online mode with a computer when this lamp is lit.
The printer is ready to use when this lamp is lit.
10
