FujiFilm 3000 manual Remaining Paper Mode, Setting the Amount of Remaining Paper

REMAINING PAPER MODE

Use the remaining paper mode to check how much paper remains on the roll in use. In addition, if the paper roll is changed midway, the amount of remaining paper can be printed on the roll for future reference.

Setting the Amount of Remaining Paper

Press the clear key for at least 3 seconds.

press for at least

3 seconds

	The ‘INPUT RESIDUAL’ screen will be
	displayed. Input the amount of
	remaining paper.
6
	For new rolls of direct thermal paper:
	Each time the paper type key is pressed, the display shows
	‘85’ or ‘98’. Input 98 feet.
	For new rolls of thermal transfer paper or HDP paper:
	Each time the paper type key is pressed, the display shows
	‘85’ or ‘98’. Input 85 feet.
	For rolls of paper that are already used:
	Input the amount using the mode key (-) and contrast key (+).
	Each time either key is pressed, the number advances 1ft.
	further in that direction.

The ‘RESIDUAL’ screen in remaining paper mode will be displayed. Press the start/stop key.

Press the start/stop key to store the input data.

'H' (hold) will be displayed.

Press the start/stop key for at least 3 seconds to revert to the ‘RESIDUAL’ screen in remaining paper mode.

Press the clear key for at least 3 seconds to revert to the original message display.

press for at least	press for at least
3 seconds	3 seconds

24