AT&T R1V2 manual Floating PDCs FPDCs, Display Support

To delete a code from the	1 At Action =	, enter 3.
list	2 At Data = , enter the code you want to delete exactly as it
	was listed	using Action=1.

Floating PDCs (FPDCs)

From the Main menu prompt, enter 5; then follow the procedure below to list, add, or delete an FPDC.

To list FPDCs	1	At Action =	, enter	1.
	2 To continue		the list,	enter c after each FPDC is printed.

To add an FPDC	1	At Action = , enter	2.
	2 At Data = , enter the		FPDC you want to add (1-9999).

To delete an FPDC	1	At Action = , enter	3.
	2 At Data = , enter the		FPDC you want to delete.

Note When you remove an FPDC, any Display ID for that

FPDC is also removed.

Display Support

To assign or remove an

FPDC Display ID

1 At Action = , enter 4.

2 At Data = , enter the FPDC.

3 Type a and at Action = , enter 5.

4 At Data = , enter the FPDC ID (not more than 11 characters, enclosed in double quotes), or “” to remove the ID.

4-8Administering System-Wide Options