AT&T R1V2 manual Administering Auxiliary Equipment, External Alerts Port Type

Administering Auxiliary Equipment

This section discusses how to assign and remove AT&T System 25 auxiliary equipment associated with special ports. It assumes that you know what special equipment is required and that you have read the System 25 Implementation Manual for R1V2 and/or the Reference Manual to understand which circuit boards you require to connect this special equipment. See the “Special Feature Port Type Codes” table in Command Reference.

For all procedures in this section, you must first specify the port you want to assign.

To assign or remove auxiliary equipment options listed in this chapter, begin with this step

1 From the Main menu prompt, enter 1.

2 At Port = , enter the port number in the form CSSPP.

External Alerts (Port Type 253)

To assign an external alert for a station [AG]

1 At Action = , enter 1.

2 At Data = , enter 253.

3 You see the prompt: Action = 2.

4 At Data = , enter the PDC of the associated station, or 0 for Night Service Alert.

Administering Auxiliary Equipment 6-1