AT&T R1V2 manual Administration Password, Toll Calls Allowed TCA Lists

Administration Password

To change the		1 From the Main menu prompt, enter 4 .
administration	password	2 At	Action = , enter	75.

3 At Data = , enter the new password (eight or fewer printable characters, with no spaces). For security, the display always shows ????????.

Toll Calls Allowed (TCA) Lists

There are four Toll Calls Allowed Lists. Therefore, you must specify a target value from 1 through 4 to access these lists. The total number of entries must not exceed 64 for all 4 lists combined.

To access a Toll Calls Allowed List

1 From the Main menu prompt, enter 7.

2 At the prompt, TOLL ALLW= , enter the number, from 1 through 4, of the list you want to access.

Continue to administer the Toll Calls Allowed List as described below.

To list members of a TCA	1 At Action =	, enter	1
group	2 To continue	the list,	enter c after each code is printed.

To add a code to the list 1 At Action = , enter 2.

2 At Data = , enter the code number in the form NXX or NPA-NXX, where:

■NXX is a 3-digit CO exchange code

■NPA-NXX is a combination of an area code (NPA) and a CO code (optionally separated by a hyphen)

You can use the WILDCARD character (•) in the CO exchange code part (NXX) of these codes. That is, you can enter NXX as NXX, NX•, N••, or •••.

To specify an entire NPA, enter NPA-•••.

Administering System-Wide Options 4-7