AT&T R1V2 manual Set Baud Rate and Parity, Enter 1 for Yes or 0 for no. The default is Bps?

Set Baud Rate and Parity

To auto-adjust baud rate on call origination

Note For each data terminal, indicate all permissible operating speeds and any required parity.

1 At Action = , enter 61. ‡

2 At Data = , enter 1 for yes or 0 for no.

The default is 1 for DLC and 0 for STARLAN CP.

Can this terminal operate	1 At Action	= , enter 62.	‡
at a low data rate?	2 At Data =	, enter 1 for	yes or 0 for no. The default is 0 .

Can this terminal operate	1 At	Action	= , enter 63.	‡
at a baud rate of 300 bps?	2 At	Data =	, enter 1 for	yes or 0 for no. The default is 1 .

Can this terminal operate	1 At Action	= , enter 64.	‡
at a baud rate of 1200	2 At Data =	, enter 1 for	yes or 0 for no. The default is 1 .
bps?

Can this terminal operate	1 At	Action	= , enter 65.	‡
at a baud rate of 2400	2 At	Data =	, enter 1 for	yes or 0 for no. The default is 1 .
bps?

‡ This is a Read-Only feature for the STARLAN CP

Administering Data Line and STARLAN CP Ports 8-7