AT&T R1V2 manual =neither, See Tables

TABLE 16-19System Administration (Menu=4) (continued)

ACTION	DESCRIPTION	DATA
82	Switched Loop Attendant system: Queue	[group number (1-32),
	should act as coverage receiver for which	0 for NONE]
83	call coverage group?
	Switched Loop Attendant system: Length	[10-255; 20]
	of hold timer (seconds)
84	Switched Loop Attendant system: DID	[PDC]
	access code to receive “0” treatment (PDC
	format, no leading zeros, can’t exist in
85	system number plan prior to this)
	Switched Loop Attendant system: Enable	[1=Y / 0=N]
86	automatic hold feature?
	Switched Loop Attendant system: Should	[1=Y / 0=N]
	calls return to the common queue after
87	second hold timer expires?
	Single-position Switched Loop Attendant	[PDC]
	system: PDC of station serving as coverage
	when the attendant is in POS BUSY mode
90	(PDC/station must already exist)
	Dual-position Switched Loop Attendant	[0=neither,
	system: Which attendant should take on	1=1st	Att.,
	default message center-like characteristics?	2=2nd	Att.]
91	(see Table 16-21)
	Switched Loop Attendant system: Enter	[1-8; see Table 16-20]
92	call type code:
	Switched Loop Attendant system, Must	[0-7; 4, 0=calls
	have selected call type via Action 91: Enter	disallowed/ or
	call type priority:	1=highest priority,
93	Switched Loop Attendant system, Must	thru 7=lowest priority]
		[0-2;see Tables 16-20
	have selected call type via Action 91, (If	& 16-21;0=either Att.,
	call type codes 2 and 6: NOT	1=1st Att.,	2=2nd
	ADMINISTRABLE) Which attendant	Att.]
	should receive this type call?

16-24Command Reference