AT&T R1V2 manual Verify Saved Translations

If the save is successful, the SAT displays:

SAVE COMPLETED SUCCESSFULLY

5 Press the STOP/EJECT button on the tape unit.

6 Rewind the tape.

7 Follow the Verify procedure below.

To troubleshoot	If the Save is not successful, the SAT displays:
		SAVE FAILED
	1	Rewind the tape and repeat the Save procedure.
	2	If this save is successful, follow steps 5 through 7 above.
	3 If this save is not successful, contact your AT&T service
		representative.

Verify the	Saved Translations
To begin	1 Insert cassette and rewind the tape (as required).
	2 Press the PLAY button on the tape unit. (The tape unit
	does not begin to operate yet.)

To Verify	1 From the Main Menu prompt, enter 9 to select
	Save/Restore.
	2 At Action = , enter 2. You see:
	Save/Restore: Action = 2 Data =
	3 Type d and at Data = , enter 1.
	You see this warning message:
	W25: YOU ARE ABOUT TO START A TAPE VERIFY
	c for continue, any other key to abort
	4 Type c. The entire line now reads:
	Save/Restore: Action = 2 Data = 1
	The tape unit automatically starts the Verify procedure.
	The tape unit stops when the verification is complete.
	If the verification is successful, the SAT displays:
	VERIFY COMPLETED SUCCESSFULLY
	(continued)

Administering Tape Save/Restore Operations 13-3