AT&T R1V2 manual To assign ARS Facility

To assign ARS Facility	1 At Action = ,	enter		15.
Restriction Level (FRL)	2 At Data = , enter		the FRL number, 0-3, from the following
	list (the default is 3):
	Level		Allowed FRL Pools
	0	-	0
	1	-	0,1
	2	-	0	, 1 , 2
	3	-	0	, 1 , 2 , 3

To enter an associated	1 At	Action = , enter 2 1 .
voice/data station	2 At	Data = , enter:

■ the PDC or DDC of the associated station. See Action=22 next to restrict Third-Party Call Set-Up to just this associated station.

■ 0 for none; either to allow this terminal to dial calls for any voice/data station, or to totally disable the feature for this terminal. See Action=22 next.

Note This action is not administrable for the STARLAN CP; the value is fixed at 0.

To restrict Third-Party	1 At	Action	=	, enter 2 2 .
Call Set-Up so the user	2 At	Data =	,	enter:
can only establish calls
		1 to restrict Third-Party Call Set-Up to just the
for the associated station	■
		associated station specified with Action=21, or to
		totally disable the feature for this terminal (if you
		entered Data=0 for Action= 21).
	■	0 to allow this terminal to call any endpoint station,
		or to enable this feature for a STARLAN CP.

The default is 1.

8-6Administering Data Line and STARLAN CP Ports