![](/images/new-backgrounds/1310229/310229119x1.webp)
NO MORE BLOCKS
c for continue, any other key for abort
5 Enter c.
You see the following display when the station is removed:
Action = 1 Data = 0
Note If you remove a station that is associated with other stations, you may need to reassign features on those other stations as well.
Changing a Data Dial Code
You can only change a dial code to one that does not conflict with any existing number. For more information; see the “Dial Plan” description in the System 25 Implementation Manual for R1V2. To determine if a dial code exists, use the Search function described later in this chapter.
There are other circumstances that might prevent you from changing a dial code. For example, the existing station number might be part of a DGC group or call pickup group. Again, use the Search function to see if the dial code is a member of any group.
To change a data dial code
1 At the Main Menu prompt, enter 2.
2 At PDC = , enter the DDC you want to change.
3 At Action = , enter 2 .
4 At Data = , enter the new dial code.
If you see Error 7012, that DDC may already be assigned.
Moving a Data Station
Use this procedure when you want to move a station to another port. Keep these considerations in mind when you move a station:
■The
■The terminal types must be the same; that is, you can only move a station to the same physical type (e.g. data terminal to data terminal port).
(continued)
Administering Data Line and STARLAN CP Ports