AT&T R1V2 manual To assign a did access code to the Slac

To assign a DID access code to the SLAC

1 At Action = , enter 84.

2 At Data = , enter the DID access code people outside the system will use to call the attendant. (PDC format, no leading zeros, can’t exist in system number plan prior to this).

To enable Automatic	1	At Action	= , enter 8 5 .
Hold	2	At Data =	, enter 1 for yes or 0 for no. The default is 0 .

To set calls to return to	1 At	Action = , enter 8 6 .
the common queue after	2 At	Data = , enter 1 for yes or 0 for no. The default is 0 .
second hold timer expires

To specify the PDC of the station serving as coverage when the attendant is in POS BUSY mode (for single-SLAC systems only)

1 At Action = , enter 8 7 .

2 At Data = , enter the PDC of a station that is currently assigned to the system. The backup station should be a multiline voice terminal with a System Access - Originate Only button.

Note This PDC will be cleared if a second SLAC is added.

Should this SLAC receive

asingle-ring reminder whenever a call arrives in the queue? (Administer for each SLAC separately.)

1 From the			Main menu prompt, enter 1 .
2	At	Action	=	,	enter	61.
3	At	Data	=	,	enter	1 for yes or 0 for no.

The default is 1.

9-8Administering Attendant Equipment