AT&T R1V2 manual Assigning Selector DXS Console Buttons, Enter

To assign Position Busy (POS BUSY)

Note For a DTAC, this feature can only be administered when there are two attendant consoles. For a SLAC, this feature can be administered when there are one or two consoles. For a system with only one SLAC, see the procedure for assigning a covering station PDC for the attendant (Action= 87) under Assign Attendant Options.

1 At	Action	=	, enter 1 0 1 .
2 At	Data =	,	enter 18.

To assign Attendant	1 At Action	=	, enter	101
Message Waiting (ATT	2 At Data =	,	enter	19. †
MSG)

Assigning Selector (DXS) Console Buttons

See the introduction to Administering Button Assignments for a description of button assignments for the Selector (DXS) Console, defaults, and a brief explanation of the button functions.

To assign DXS console 1 From the Main menu prompt, enter 1.

buttons, begin with this

2 At Port = , enter the DXS console location (CSSPP).

step

To assign PDC ranges to the DXS console group select buttons

Note There are seven possible DXS console PDC ranges the attendant can access with group select buttons. Action = 21 assigns a PDC hundreds group to the first DXS group select button. Action = 22 does the same for the second group select button. You assign the additional PDC ranges using the numbers 23 through 27 at Action = .

1 At Action = , enter a number, 21-27.

2 At Data = , enter the hundreds group followed by two periods. The allowable range is from . . (PDCS from 1 through 99) through 99.. (PDCS from 9900 through 9999). The defaults are 2.. through 8.. .

† This feature is only administrable for the DTAC.

Administering Button Assignments 10-11