AT&T R1V2 manual To restrict access to all

To restrict access to all	1 At	Action = , enter 4.
other trunk pools	2 At	Data = , enter 1 for yes or 0 for no. The default is 0 .

To set calls to this station to hunt to another station if this station is busy

1 At Action = , enter 12.

2 At Data = , enter the DDC of the station to hunt to, or 0 for no hunt. The default is 0.

Note If you are assigning this option to a STARLAN CP, the value you assign to the first port will not be copied to the other ports on the board. You need to administer each port separately for this action.

To restrict this station	1 At	Action = , enter 1 3 .
from making any	2 At	Data = , enter 1 for yes or 0 for no. The default is 0 .
outward calls

To assign a toll restriction class

1 At Action = , enter 14.

2 At Data = , enter a toll restriction class number, 0-4, from the following list (the default is 0):

0 - Not toll restricted

1- Toll call allowed lists 1-4

2- Toll call allowed lists 2-4

3- Toll call allowed lists 3-4

4- Toll call allowed list 4 (only)

Administering Data Line and STARLAN CP Ports 8-5