AT&T R1V2 manual At Data = , enter PDC of the station with the buttons

Port Location of External	This search requires a PDC for input; it returns the port
Alert	location (CSSPP) of the external alert associated with the
	station.
	1	At Action = , enter	1.
	2	At Data = , enter 19.
	3	At Action = , enter	2.
	4 At Data = , enter the		PDC of the station with external
		alert.

Button Location on	This search yields a button number(s) that has assigned to it
Stations	the function for which you are searching on a given station.
	1	At Action = , enter	1.
	2	At Data = , enter 20.
	3	At Action = , enter	2.
	4 At Data = , enter the		PDC of the station with the buttons.
	5	At Action = , enter	3.
	6 At Data = , enter the		button function code from the
		“Action 101” column in Table 16-3 (Chapter 16).

Area Codes Assigned to a This search lists all area codes (NPAs) that will select a

Specific ARS Pattern specified ARS Routing Pattern. These routing patterns were assigned in the section entitled Area Code Routing Table in Administering Automatic Route Selection. If the wildcard character “•” is entered, all NPA/Routing Pattern associations are provided.

1 At Action = , enter 1.

2 At Data = , enter 21.

3 At Action = 2, enter 2 .

4 At Data = , enter the pattern number for the NPA association you’re looking for, 1 through 8 or ••.

5 Enter c to list, enter r to remove.

System Searches 14-7