Listing Circuit Packs

This item lets you list the board type, vintage, and cabinet location for each circuit pack in the system, except the CPU and Memory CPs. When you enter Data= 50 for this action item, you see:

SLOT CABINET 1 CABINET 2 CABINET 3

and the message, Type c to list.

When you type c, the system displays information for slot number one, as follows:

SLOT CABINET 1 CABINET 2 CABINET 3

01

ZTN85 04

This display tells you there is a ZTN-85 04 in cabinet 2, slot 1. To see information about subsequent slot numbers, type c.

CP Display Symbols You may see a *, #, or $ immediately following a CP identification number. These symbols indicate:

*Mismatch—this CP does not match the CP translated to be in this slot

#Unused—this CP is not translated

$

Invalid—this CP is invalid for this system

The symbol and its meaning are repeated at the end of the line in which it appears. If a circuit pack has been translated but is not present, MISSING appears where the CP would have been listed.

To display list of port

1 At

Action =

, enter 1.

board types, vintages,

2 At

Data = ,

enter 50.

and locations

 

 

 

System Searches

14-11

Page 115
Image 115
AT&T R1V2 manual Listing Circuit Packs