AT&T R1V2 manual Be sure to record port assignments on the trunk forms

TABLE 3-2Initialization Sequence

From the information provided	Enter these translations:
on this form,
1 System Options Form	Enter system toll restriction options, pooled modem
	options, and other system options following the
	procedures in Administering System-Wide Options.
2 Toll Calls Allowed Lists Form	Enter these lists following the procedures in Administering
	System-Wide Options
3 Floating Personal Dial Code List	Enter all Floating PDCs following the procedure in
	Administering System-Wide Options
4 System Speed Dialing List	Enter System Speed Dialing numbers following the
	procedure in Administering System-Wide Options
5 Virtual Facility List	Enter virtual facility codes following the procedure in
	Administering System-Wide Options.
6 Trunk forms	Assign all trunk ports and assign each trunk’s class of
	service following the procedures in Administering Trunks.
	Be sure to record port assignments on the trunk forms.

7 Auxiliary Equipment Options

form

Assign and set up any special feature ports following the

procedures in Administering Auxiliary Equipment. Again,

be sure to record port assignments.

Continued on next page

3-4Initializing the System