AT&T R1V2 manual Save Your Translations

4 Press the REWIND button, and wait for the tape unit to

completely rewind tape. [You should do this before beginning any save, verify, or restore operation so you know that you are at the beginning of the tape. ]

You do not have to be concerned about the clear “leader” material at the beginning and end of the tape. The system will start the tape at the correct point.

5 Press the STOP/EJECT button to disengage the REWIND button.

Save Your Translations

To begin	1 Insert cassette and rewind the tape.
	2 Press the RECORD and PLAY buttons simultaneously.
	[The tape unit does not begin to operate yet.]

To Save	1 From		the	Main Menu	prompt, enter 9 to select
		Save/Restore.
	2	At Action		= , enter 1.	You see:
			Save/Restore: Action = 1 Data =
	3	Type d and at Data = enter 1. You see this warning
		message:
			W24: YOU ARE ABOUT TO START A TAPE SAVE
			c for continue, any other key for abort
	4	Type	c.	The line now reads:
			Save/Restore: Action = 1 Data = 1
		The tape unit automatically starts the Save procedure.

Caution: System 25 does not know whether your tape unit is actually running at this point. For example, if you forgot to press the RECORD button along with the PLAY button, the system cannot tell you that. You might only discover this problem by using the Verify function.

When the save is complete, the tape unit stops.

(continued)

13-2Administering Tape Save/Restore Operations