AT&T R1V2 manual Station Hunting To, Group Call Coverage To, Call Pickup To assign

Station Hunting: To

administer this station to

hunt to another station if

busy

1 At Action = , enter 12.

2 At Data = , enter the PDC of the station to hunt to next, or 0 for none. The default is 0.

Group Call Coverage: To

specify which receiver

group will cover this

station’s calls

1 At Action = , enter 7.

2 At Data = , specify which “receiver” group will answer this station’s calls. Enter:

■ a call coverage group number, 1-32

■a DGC call coverage group number, 101-132. This number actually corresponds to a DGC group number 1-32 (the “1“ in the hundreds’ place indicates DGC coverage instead of standard call coverage).

■0 for none.

The default is 1.

Call Pickup: To assign	1 At Action = , enter	11.
this station to a call	2 At Data = , enter the	group number, 1 through 16, or 0

pickup group

for none. The default is 0.

Personal Speed Dialing:	1 At Action = , enter 1 6 .
To enable personal speed	2 At Data = , enter 1 for yes or 0 for no. The default is 1.
dialing at this station

Night Service: To display

the number of any trunks

assigned to this station

for Night Service

1 At Action = , enter 5 1 .

2 To continue the list, enter C after each trunk number is printed.

7-6Administering Voice Stations