AT&T R1V2 manual 9PORT/PDC Administration, Data Terminals Menu=1/2, For none

TABLE 16-9PORT/PDC Administration, Data Terminals (Menu=1/2)

ACTION	DESCRIPTION	DATA
0	Physical port number	CSSPP
1	Enter data type code	[See Table 16-10]
2	Enter DDC	[1-9999; 600-704]
3	Restrict dial access to CO trunk pool†	[1=Y / 0=N]
4	Restrict dial access to all other trunk pools†	[1=Y / 0=N]
12	DDC of station to hunt to next	[PDC; 0 for none]
13	Restrict this station from making outward	[1=Y / 0=N]
14	calls†	[1-4;0 for none]
	Assign toll restriction class†
15	Assign ARS Facility Restriction Level†	[0-3; 3]
21	Enter associated voice/data endpoint station‡	[PDC/DDC or
		0 for none]

22Restrict Third-Party Call Set-Up so user can only establish calls for the associated station

(see Action 21)†

61Auto-adjust baud rate on call origination. * (The default is 0 for STARLAN CP.)

62Allow terminal to operate at low bits per second (bps)*

63Allow terminal to operate at a baud rate of 300 bps*

64Allow terminal to operate at a baud rate of 1200 bps*

65Allow terminal to operate at a baud rate of 2400 bps*

66Allow terminal to operate at a baud rate of 4800 bps*

67Allow terminal to operate at a baud rate of 9600 bps*

68Allow terminal to operate at a baud rate of 19200 bps*

69Assign this parity setting to correspond with terminal’s parity setting*

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[1=Y / 0=N]

[0-3; 2]

Continued on next page

* Read-only for STARLAN CP.

†If data port type code 1802 (STARLAN CP), default values are relevant for the first installed port on the board. Values assigned to this action item on any of the four ports will be copied to all four ports on this board.

‡ Not administrable for STARLAN CP.

Command Reference 16-11