AT&T R1V2 manual 11Port Administration, Trunks Menu=1, 32 0 for none, 0=won’t ring, Only

TABLE 16-11Port Administration, Trunks (Menu=1)

	ACTION	DESCRIPTION	DATA
	0	Physical port number	CSSPP
	1	Enter trunk port type code	[See Table 16-12]
	2	Enter trunk number	[0001-9999; 0001-0104]
	3	Assign class-of-service code	[(DID—1-4; 3)
			(All other–
			See Table 16-13; 8)]
4		Assign pooled facility access code.	[Facility access code;
			(100,101,102)
			0 if trunk not in any group]
5		Allow dial access	[1=Y / 0=N]
6		Assign the trunk to a DGC group	[1-32;0 for none]
7		Make this a directed night service trunk	[1=Y / 0=N]
8		Assign night service delay announcement	[1 for first announcement,
			2 for second announcement,
			0 for none]
9		Type of signaling on incoming calls	[1=Tone / 0=Pulse]
		(Tie-Trunks only)

10Determine pooled trunk hunting order of a specified trunk {Read Only}

11	For Switched Loop Attendant systems ONLY:	[0-7;0=won’t ring in
	Priority of trunk to ring in queue†	queue/ or 1=highest
		priority, thru 7=lowest
		priority]
12	For Switched Loop Attendant Systems ONLY:	[0-2; 0=either Att. / 1 = 1st
	Which attendant should receive calls from this	Att. 0NLY/2=2nd Att.
	trunk?†	ONLY]
90	Assign/remove trunk Display ID‡	[”11 characters or less”, or
		“” to remove]

†Not administrable for trunk port type codes 901-902 or 1003-1008

‡ Not administrable for trunk port type codes 901-902.

16-14Command Reference