Kyocera FS-C5200DN, FS-C5300DN, FS-C5100DN manual Admin Administrator settings

Admin >

ID

_

Admin (Administrator settings)

The administrator setting is a function that identifies the user who can use the printer and can be used to manage users. The administrator is authenticated by the entered administrator ID and password and can then use the printer's security functions and Job Accounting functions.

The options available in Admin are as follows:

•ID (Administrator ID input)

•Password (Administrator password input)

•Change ID (Administrator ID change)

•Change Password (Administrator password change)

1Press [MENU].

2Press U or V repeatedly until Admin > appears.

ID (Administrator ID input)

You can use this to set the administrator ID. The default setting is the numeric part of your printer's model name. If you use FS-C5300DN, enter "5300".

1Press Z while Admin > is displayed.

2The message display shows ID and a blinking cursor (_).

3Press U or V to increase or decrease, respectively, the value at the blinking cursor. Enter the specified ID. Use Y and Z to move the cursor right and left. Enter an ID consisting of between 1 and 16 numbers.

4Press [OK]. Proceed to the next step Password (Administrator Password input).

Using the Operation Panel 6-75