Packaging: Paper should be packed in a sturdy carton to protect it from damage during transport. Quality paper obtained from a reputable supplier is usually correctly packaged.

Note You might see the printer emitting steam in the area around the top tray if you use damp paper, but it is safe to continue printing.

Special Paper

The following types of special paper can be used:

Paper Type to be Used

Paper Type to be Selected

 

 

Thin paper (60 to 64 g/m²)

VELLUM

Thick paper (90 to 220 g/m²)

THICK

Colored paper

COLOR

Recycled paper

RECYCLED

Overhead projector transparencies

TRANSPARENCY

Postcards

CARDSTOCK

Envelopes

ENVELOPE

Label

LABELS

Coated paper

COATED

Use paper that is sold specifically for use with copiers or printers (heat- fusing type). When using transparencies, labels, thin paper, envelopes, postcards, or thick paper, feed the paper from the MP tray. For details, refer to Paper Source (Selecting the paper feed source) on page 6-34.

Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper causes harm to the machine or operator.

Note Before purchasing any type of special paper, test a sample on the machine and check that printing quality is satisfactory.

Handling Paper

2-7

Page 31 Page 33
Page 32
Image 32
Kyocera FS-C5100DN, FS-C5300DN, FS-C5200DN manual Special Paper, Paper Type to be Used Paper Type to be Selected
Page 31 Page 33
Top Page Image Contents