6-70 Using the Operation Panel
Select Account (Department-specific settings)
This specifies the functions used for managing individual account IDs.
The options available in Select Account are as follows:
• Counter (Account-specific counter management [color + monochrome
total])
• Color Counter (Account-specific counter management [color])
• Restriction (Print restriction selection [color + monochrome total])
• Color Restrict (Print restriction selection [color])
• Maximum Output (Maximum print output setting [color + monochrome
total])
• Color Max.out (Maximum print output setting [color])
• Reset Counter (Counter reset)
1Press Z while Job Accounting > is displayed.
2Press U or V repeatedly until >Select Account> appears.
3Press [OK]. A blinking question mark (?) appears.
4Each time you press U or V, the next registered account ID in the
sequence appears.
5Display the desired account ID and press [OK]. Press Z, the display
changes to the individual department setting screen.
Counter (Account-specific counter management [color +
monochrome total])
Displays the total number of pages printed for the currently selected
account.
IMPORTANT You can only view the counter. You cannot change it.
1Set the account ID and then press U or V repeatedly until
>>Counter appears. (E.g.: 100)
The counter shows a number between 0000000 and 9999999.
2Press [MENU]. The display returns to Ready.
Color Counter (Account-specific counter management [color])
Displays the total number of color pages printed for the currently selected
account.
IMPORTANT You can only view the counter. You cannot change it.
1Set the account ID and then press U or V repeatedly until >>Color
Counter appears. (E.g.: 50)
The counter shows a number between 0000000 and 9999999.
2 Press [MENU]. The display returns to Ready.