Kyocera FS-C5200DN manual 3DES ? Off AES ? Off IPP over SSL ? Off, 3DES SSL Server 3DES setting

>>3DES ?Off

>>AES ?Off

>>IPP over SSL ?Off

3DES (SSL Server 3DES setting)

3DES (Triple Data Encryption Standard) is a high level of encryption in which DES encryption is repeated threefold.

The default setting is Off.

1 Press Z while >SSL Server On > is displayed. >>3DES appears.

2Press [OK]. A blinking question mark (?) appears.

3Select On or Off using U or V.

4Press [OK].

5Press [MENU]. The display returns to Ready.

AES (SSL Server AES setting)

AES (Advanced Encryption Standard) was developed to replace DES as the standard encryption as the safety of DES has declined. AES is a block encryption system that uses 128-bit blocks and an SPN structure (a typical structure for repeated encryption) with three selectable key lengths of 128, 192 and 256 bits.

The default setting is Off.

1 Press Z while >SSL Server On > is displayed. >>AES appears.

2Press [OK]. A blinking question mark (?) appears.

3Select On or Off using U or V.

4Press [OK].

5Press [MENU]. The display returns to Ready.

IPP over SSL (SSL Server IPP over SSL setting)

IPP over SSL is an encryption function that uses SSL for communications between users and servers in network printing. To use IPP over SSL, both server and client must support the protocol.

The default setting is Off.

1 Press Z while >SSL Server On > is displayed. >>IPP over SSL appears.

2Press [OK]. A blinking question mark (?) appears.

3Select On or Off using U or V.

4Press [OK].

5Press [MENU]. The display returns to Ready.

6-66 Using the Operation Panel