Kyocera FS-C5300DN Selected cassette is being prepared, Printing, Containers, Match the printers

Message		Corrective Action
		A paper jam has occurred. The location of the paper jam is indicated in place of the #’s. For
	Paper jam
	###############	details, refer to Clearing Paper Jams on page 5-12.
		The selected cassette is being prepared.
	Paper loading
		There is no paper cassette in the feeder, or the cassette is not inserted properly. After
	Paper path error
		reinserting the paper cassette, you should be able to print. When two or more optional
		feeders are installed and the lowest one is selected, the same message will appear if any of
		the upper paper feeder and the printer cassette is improperly installed.
		The data transferred to the printer was too complex to print on a page. Press [GO] to resume
	Print overrun
	Press GO	printing.
		A RAM disk error has occurred. Look at the error code given in place of ## and refer to
	RAM disk error##
	Press GO	Storage Error Codes on page 5-10. To ignore the RAM disk error, press [GO].
		Two message items are displayed alternately. Toner has run out in the toner container(s).
	Replace toner
	C,M,Y,K	Replace the toner container using a new toner kit for the particular color. The printer does not
		operate when this message is displayed.
		For example, if Replace toner C,K is displayed, replace the cyan and the black toner
		containers.
	Replace toner
	Clean printer
		Replace the toner container using a new toner kit. Color of the toner container that needs to
	Toner low
	C,M,Y,K	be replaced is represented by C (Cyan), M (Magenta), Y (Yellow), and K (Black).
		The top tray has become full (approx. 250 pages). You must remove all printed pages from
	Top tray
	paper full	the top tray. When the printer detects that the top tray is empty again, the printer will
		continues printing into the top tray.
		This message is displayed if the installed toner container's regional specification does not
	Unknown toner
	C,M,Y,K	match the printer's.
		Install the specified toner container.
		Displayed when the installed toner is not the original Kyocera product. Install original Kyocera
	Unknown toner
	installed	toner.
		An error has occurred in the USB memory device. To return the printer to the print-ready
	USB memory err##
	Press GO	status, press [GO].
		When the cassette does not contain any paper that matches the print data (paper size and
	Use alternative?
	Cassette 1	type), this message allows you to specify an alternative cassette to use instead. A paper
		source number is only displayed when an optional paper feeder is installed. To print from a
		different paper source, refer to Paper Feed Mode (Setting the paper feed source) section of
		the Advanced Operation Guide.
		Displayed when an attempt is made to register an account in the Job Accounting menu by
	Wrong Account	entering an account code that already exists.
		For more information, refer to Job Accounting (Job Accounting selection/setting) section of
		the Advanced Operation Guide.

Troubleshooting 5-9