Kyocera FS-C5200DN manual Printing Additional Copies using Quick Copy, Deleting a Quick Copy Job

>Quick Copy ?Harold

>Quick Copy ?Arlen

>Arlen

?Report

>Report

Copies 001

>Report

Copies 001

>Report Delete

Printing Additional Copies using Quick Copy

1Press Z while Job Box > is displayed.

2Press U or V repeatedly until >Quick Copy appears. The name entered in the printer driver (Harold, in this example) also appears.

3Press [OK]. A blinking question mark (?) appears before the user name.

4Press U or V to display the desired user name, Arlen, in this example.

5Press [OK]. The job name entered in the printer driver (Report, in this example) appear with a blinking question mark (?) before the letters.

6Press U or V to scroll to the desired job title.

7Press [OK]. The number of copies to be printed can be set. To increase the copy count, press U; to decrease the copy count, press

V.

8Press [OK] to finalize the copy count. The printer prints the specified number of copies for the job.

Deleting a Quick Copy Job

1Follow steps 1 through 6 in the above section to let the title of the job to be deleted displayed.

2When the title of the job to be deleted is displayed, e.g. Report, press [OK]. The cursor (_) below the copy count starts to blink.

3Press V repeatedly until Delete appears below the title.

4Press [OK]. The message Processing appears and the stored quick copy job is deleted.

Using the Operation Panel 6-21