Kyocera FS-C5200DN, FS-C5300DN Auto Error Clear ? Off, Auto Error Clear Auto error clear setting

>>Auto Error Clear ? Off

Auto Error Clear (Auto error clear setting)

If an error that still allows you to continue printing occurs, the next received data is automatically printed after a set period of time elapses. For example, if the printer is shared over a network as a network printer and one person causes one of the above errors, after the set period of time elapses, the data sent from the next person is printed. The default setting is Off (Auto Error Clear disabled).

The auto clear errors are:

•Memory overflow Press GO

•Print overrun Press GO

• KPDL error ## Press GO

•File not found Press GO

•Hard disk err ## Press GO

•RAM disk error## Press GO

•MemoryCard err## Press GO

•Illegal Account Press GO

•Exceeded Max.out Press GO

•Account error ## Press GO

•Duplex disabled Press GO

•Job not stored Press GO

•No multi copies Press GO

•USB memory err## Press GO

For setting the auto error clear recovery time, refer to the next section Error Clear Timer (Setting the error clear time).

1Press Z while >Timer > is displayed.

2Press U or V repeatedly until >>Auto Error Clear appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

Using the Operation Panel 6-57