Kyocera FS-C5200DN, FS-C5300DN, FS-C5100DN manual Dimension 216 mm, Entering the Width and Length

Entering the Width and Length

Enter the paper size for X Dimension and Y Dimension as shown in the figure.

105 to 216 mm

(4.13 to 8.5 inches)

Y Dimension	148 to 356 mm	(5.83 to 14.02 inches)
X Dimension

>>X Dimension 216mm

1When the unit of measurement is set, press V. >>X Dimension appears (the paper width setting).

2Press [OK]. A blinking cursor (_) appears.

3Press U or V to increase or decrease the value of the figure where the cursor is blinking and display the desired width.

Acceptable paper widths are as follows:

•Cassette : 105 to 216 mm

•Paper Feeder PF-500/PF-510 (optional) : 92 to 216 mm

4Display the paper width and press [OK].

5When the width is set, press. >>Y Dimension appears (the paper length setting). Set the desired length in the same way as the width. Acceptable paper lengths are as follows:

•Cassette : 148 to 356 mm

•Paper Feeder PF-500/PF-510 (optional) : 162 to 356 mm

6Display the paper length, press [OK].

7Press [MENU]. The display returns to Ready.

6-30 Using the Operation Panel