Kyocera FS-C5200DN, FS-C5300DN, FS-C5100DN manual Duplex ? Off Paper Mismatch ? On

>>Duplex ? Off

>>Paper Mismatch ?On

Duplex (Duplex printing error detection setting)

If the error detection setting for duplex printing has been turned On, and you attempt to print onto a paper size and paper type that cannot be used for duplex printing, the Duplex disabled Press GO error message will be displayed and printing will stop.

On	• To print onto one-side of the paper only when this message
		is displayed, press [GO].
	•	Press [Cancel] to cancel the printing itself.
Off	•	To print onto one-side of the paper.

1Press Z while >Error Handling > is displayed.

2Press U or V repeatedly until >>Duplex appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed)

Turn this setting to Off if you want to continue printing even if the paper size or type you specified is different from the fixed paper source, or turn it to On to have the paper feed error displayed.

1Press Z while >Error Handling > is displayed.

2Press U or V repeatedly until >>Paper Mismatch appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

6-54 Using the Operation Panel