RAStateless ? Off DHCPv6 ? Off | Kyocera FS-C5100DN, FS-C5300DN

>>RA(Stateless) ? Off

>>DHCPv6 ?Off

4Select On or Off using U or V.

5Select On and press [OK].The display changes to the settings shown below.

RA(Stateless) (RA (Stateless) setting)

The IPv6 router communicates (transmits) information such as the global address prefix using ICMPv6. This information is the Router Advertisement (RA).

ICMPv6 stands for Internet Control Message Protocol, and is a IPv6 standard defined in the RFC 2463 "Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification".

1 Press Z while >TCP/IP (IPv6) On > is displayed.

2Press U or V repeatedly until >>RA(Stateless) appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

DHCPv6 (DHCPv6 setting)

DHCPv6 is the next-generation of the Internet's Dynamic Host Configuration Protocol and supports IPv6. It extends the BOOTP startup protocol that defines the protocols used for transferring configuration information to hosts on the network.

DHCPv6 permits the DHCP server to use its expanded functionality to send configuration parameters to an IPv6 node. Because the network addresses that can be used are allocated automatically, the IPv6 node management workload is reduced in systems where the administrator has to exercise close control over IP address allocation.

1 Press Z while >TCP/IP (IPv6) On > is displayed.

2Press U or V repeatedly until >>DHCPv6 appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

6-46	Using the Operation Panel

Image 137

Kyocera FS-C5100DN, FS-C5300DN RAStateless ? Off DHCPv6 ? Off, RAStateless RA Stateless setting, DHCPv6 DHCPv6 setting

Contents

FS-C5100DN/C5200DN/C5300DN Contents Computer Interface Specifications Glossary Index Regarding Tradenames Legal and Safety Information Monotype Imaging License Agreement License AgreementsTypeface Trademark Acknowledgement Copyright 1998-2006 The OpenSSL Project. All rights reserved Open SSLeay License This Software is Provided by the OpenSSL Project AS is Original SSLeay LicensePage Above warning is valid only in the United States of America Interface connectorsCompliance and Conformity Laser Safety Safety InformationLaser Notice Radio Frequency TransmitterPage Cdrh Regulations Safety Instructions Regarding the Disconnection of PowerOzone concentration 2004/108/EC, 2006/95/EEC, 93/68/EEC and 1999/5/EC Disclaimer Canadian Department of Communications Compliance StatementEN ISO Energy Saving Control Function Environment Installation PrecautionsOther Precautions Handling of Plastic Bags Other PrecautionsPower Supply/Grounding the Printer Precautions for Use Other Precautions Convention Description Example About the Operation GuideConventions Xix Personal injuryPage Machine Parts Machine Parts Components at the Left of the Printer Components at the Front of the Printer Components at the Rear of the Printer Paper Transfer Unit Paper Ramp Duplex Unit Envelope SwitchInternal Components Operation Panel Handling Paper Handling Paper Specification Paper SpecificationsGeneral Guidelines Paper Availability Minimum and Maximum Paper Sizes Size Product WeightRecommended Paper Letter, Legal Hammermill Laser Print 90 g/m² 24 lb Condition Selecting the Right PaperComposition Paper Sizes Paper Weight Equivalence Table Basis WeightBond Weight lb Europe Metric Weight g/m² Smoothness Other Paper Properties Moisture ContentPaper Grain Paper Type to be Used Paper Type to be Selected Special Paper Transparency Labels Envelopes Slide the envelope switch to envelope mode and printPostcards Colored Paper Thick PaperPreprinted Paper Recycled Paper Coated Paper Paper Type Indicators Optional paper feeder PF-510 Paper Type Paper Weight Duplex Path Feeder PF-510 Feeder PF-500Paper Source Paper Type Optional Paper Loading Paper into the Cassette Loading Paper Paper Guides Release Lever Exhausted, the pointer will go down to the level of empty Loading Paper into the MP Multi-Purpose Tray Printer one at a time When printing on transparencies, feed the sheets intoIf the paper is considerably curled in one direction, for Paper in the opposite direction to counteract the curl Paper stopper Printing Operation Printing Operation This is mandatory to make the settings effective TCP/IP, TCP/IP IPv6 settingsChanging Network Interface Parameters Network TCP/IP Press U or V to select On or Off as the setting for Dhcp TCP/IP IPv6 TCP/IP IPv6 On RAStateless Off DHCPv6 Off ?Off Security NetWare PasswordAppleTalk On IPP Off SSL Server Off IPSec Off NetWare AppleTalk AppleTalk On ?On IPP On IPSec ?Off IPSec On ?OnSSL Server Security Level Security Level High Printing a Network Interface Status Adjust/ Maintenance Print Network Status Page ?Adjust/Maintenance Click Install software Installing the Printer DriverInstalling the Software in Windows Express Mode Select Custom Mode Custom ModeInstallation on a Macintosh Open System Preferences and click Print & Fax Printer driver installation program starts upPage Page Printing from Application Software Status Monitor Accessing the Status MonitorExiting the Status Monitor Screen Overview Status Monitor icon Enable Event Notification Status Monitor SettingsSound Notification Tab Sound file Enlarge window Appearance TabAlways on top Transparency Select the software package to remove Uninstalling Software Windows PCClick Uninstall Maintenance Maintenance Frequency of Toner Container Replacement Toner Container ReplacementGeneral Information Toner Color Life of the Toner Container Printable pages Toner Kits FS-C5300DN Open the top cover top tray Replacing the Toner Container Plastic Bag Toner Feed Slot Replacing the Waste Toner Box Open the cap of the new waste toner box Cleaning the Paper Transfer Unit Cleaning the Printer Push the front cover back in completely Maintenance Maintenance Troubleshooting Troubleshooting Tips Symptom Check Items Corrective Action Printed Results Corrective Action Print Quality Problems Faint or blurred printing Black or white vertical streaks Check the paper chute and the ramp Grey background Message Corrective Action Error Messages Servicing. Contact your service technician Displayed when the envelope switch is set to envelope modeBeing used Previous screen is displayed again 1 or 2 seconds Cancel Selected cassette is being prepared Install the specified toner containerPrinting Containers Code Meaning Storage Error CodesHard Disk Errors RAM Disk Errors Code Meaning Memory Card and USB Memory Errors Code Meaning Paper Jam Message Description Reference Clearing Paper JamsPossible Paper Jam Locations Paper jam at Cassette General Considerations for Clearing JamsPaper Jam at MP Tray Utilizing Online Help Messages Paper Jam in Printer Paper Jam at Cassette 2 to Troubleshooting Using the Operation Panel Using the Operation Panel General Information Message Display Understanding the Operation Panel Message Meaning Error CodesStatus Information Ready, Data, and Attention Indicators Indicators in Message DisplayIndicator Description Ready Keys Cancel KeyGO Key Menu Key OK Key Menu Selection System Using the Menu Selection SystemEntering the Mode Selection Menu Paper Weight Normal Paper SettingsType Adjust Report Print Setting a Mode Selection Menu Print Menu Map Report PrintPrint Menu Map ? Menu Map Sample Menu Map Print Status Using the Operation PanelPrint Status Page ? Understanding the Status Installed Options Printer Settings InformationFirmware Version Network Status Print RAM Disk File List Print Fonts ListPrint Hard Disk File List Print Mem. Card File List Print Mem. Card File List ? USB Memory USB Memory USB memory selection00Folder 00Folder 2 00File ? 00File Copies 001 Copies Number of copies Copies 010 Paper Source ? Cassette Remove Device ?Paper Source Selecting the paper feed source Remove Device Removing the USB memory Quick Copy Proof-and-Hold Private Print Stored Job Job BoxJob Retention Job Box Quick Copy Using Quick Copy Deleting a Quick Copy Job Printing Additional Copies using Quick CopyPress Z while Job Box is displayed Deleting a Proof-and-Hold Job Using Proof-and-HoldPrinting Remaining Copies of a Proof-and-Hold Job Releasing a Private/Stored Job Private/Stored ?Harold Arlen ?Agenda CopiesPrivate/Stored Printing a private print/stored job Job Box Configuration Job Box Configuration Quick CopyAgenda Copies Agenda Delete Deleting a Private/Stored Job Counter Printed Pages Color 1000 Monochrome Counter Viewing the counter valuePrinted Pages Displaying the total printed pages Color Displaying the color printed pages MP Tray Size Setting MP tray paper size Paper SettingsPaper Settings MP Tray Size ? A4 Press OK Press MENU. The display returns to Ready MP Tray Type Setting the MP tray paper typeMP Tray Type Selecting the Size Dial Setting Cassette 1 to 4 Size Setting the cassette paper sizeSetting the Paper Size from the Operation Panel Cassette Size ? Custom Unit Selecting the unit of measurement Unit ? mm Entering the Width and Length Dimension 216 mm Cassette Type Cassette 1 to 4 Type Setting the cassette paper type Type Adjust Creating custom paper type Duplex Path Setting the duplex path Reset Type Adjust Resetting the custom paper typePaper Weight Setting the paper weight Print Settings Print Settings When the Paper Runs Out During Printing Paper Feed Mode ? AutoPaper Feed Mode Setting the paper feed source Binding Modes Duplex Duplex printing Override A4/LT Overriding difference between A4 and Letter Duplex ? Off Override A4/LT ? Off Error Report ? On Emulation Setting the emulationError Report Printing Kpdl errors Emulation Color Mode Selecting color or monochrome printing Color Mode ? Color Print Quality Gloss Mode ? LowPrint Quality Setting print quality Gloss Mode Selecting the gloss mode EcoPrint Mode Selecting the EcoPrint mode EcoPrint Mode ? OffSet Setting pagination Set Orientation Print orientation Orientation ? Portrait Wide A4 ? OffWide A4 Wide A4 pitch TCP/IP IPv4 settings Network Network settings ? Off Dhcp ? Off Dhcp Dhcp settingIP Address IP address setting Subnet Mask Gateway Subnet Mask Subnet mask settingGateway Gateway setting Bonjour Bonjour setting TCP/IP IPv6 IPv6 settingsThis selects the settings for TCP/IP IPv6 Bonjour ? Off RAStateless ? Off DHCPv6 ? Off RAStateless RA Stateless settingDHCPv6 DHCPv6 setting MSG Language Selecting the message language Device Common Selecting/Setting the common deviceDevice Common MSG Language ? English Key Confirm. Key confirmation tone setting Buzzer Alarm Buzzer settingJob End Job completed tone setting Buzzer Key Confirm. ? On Job End ? Off Error Error tone setting Ready ? Off Error ? OnReady Preparation completed tone setting RAM Disk Mode Using the RAM disk RAM Disk Mode ? Off Hard Disk RAM Disk Size Setting the RAM disk sizeRAM Disk Size 119 MByte Format ? Memory Card Using the memory cardMemory Card Format Formatting hard disk Format Formatting memory card Error HandlingError Handling Error detection setting Off Duplex Duplex printing error detection settingDuplex ? Off Paper Mismatch ? On Form Feed Time Out Automatic form feed timeout setting Timer Form Feed Time Out 030secTimer Timer setting Sleep Timer Sleep timer timeout time Sleep Timer 030 min Auto Error Clear Auto error clear setting Auto Error Clear ? Off Panel Reset Timer Setting the panel reset timer Error Clear Timer Setting the error clear timeAuto Panel Reset Auto panel reset settings Auto Sleep ? On Auto Sleep Setting the sleep timer Security ID Administrator ID input Password Administrator Password input Password Block USB Host ? UnblockBlock Interface external device block setting USB Host USB memory slot setting USB Device ? Unblock Option I/F ? Unblock USB Device USB interface settingOptional Interface Network interface card setting NetWare ? On Frame Type ? Auto NetWare NetWare settingFrame Type Frame type setting IPP IPP setting AppleTalk AppleTalk settingAppleTalk AppleTalk ? On IPP ? Off SSL Server ? Off DES ? Off SSL Server SSL Server settingDES SSL Server DES setting AES SSL Server AES setting 3DES SSL Server 3DES settingIPP over SSL SSL Server IPP over SSL setting 3DES ? Off AES ? Off IPP over SSL ? Off Security Level Security Level setting IPSec IPSec settingHttps SSL Server Https setting Https ? Off IPSec IPSec ? Off Job Accounting Job Accounting Job Accounting selection/ setting Job Accounting Enabled Password Job Accounting ? Off Enter Account Color Counter Account-specific counter management color Select Account Department-specific settingsSelect Account ?00000000 Counter 0000100 Color Counter Color Restrict Print restriction selection color Restriction ? Off Color Restrict ? OffSet the account ID and then press U or V repeatedly until Reset Counter Counter reset Maximum Output Color Max.out Reset Counter?Color Max.out Maximum print output setting color Delete Account Department removal Add Account Delete Account ?001Add Account Department registration Print Job Accounting List Job Accounting list output Admin Admin Administrator settings Change ID Administrator ID change Password Change IDYou can use this to change the administrator ID 002 You can use this to change the administrator password Change PasswordChange Password Administrator Password change Adjust/ Maintenance Adjust/Maintenance Adjust/Maintenance selection/settingColor Calibration ? Color Calibration Registration Normal Color registration standard Print Registra tion Chart ? Color Registration Correction Chart Sample Color Registration Correction Chart Adjust Magenta L=B V=0 R=0 Adjust Magenta L=0 V=0 R=0Adjust Magenta Press U or V until that value is displayed Registration Details Color registration detailed Page 12345 MH=B0000 MV=0 12345 3 Adjust magenta12345 MV=0 MH=00000 12345 3 Cyan correction and Y 12345 3 Yellow correction Restart Printer ?Restart Printer Service for maintenance Service Print Status Page ? Print Network Status Page ?Print Status Page Printing the service status Print Network Status Page Printing the network status Print Test Print Test Page ? Maintenance ?DEV-CLN Developer/Refresh mode setting When cleaning ends, the display returns to Ready LSU/Charger LSU/Main charger cleaning mode settingDrum Drum/Refresh mode setting LSU/Charger ? Drum ? Options Options General Information Expansion Memory Modules Expansion Memory Modules Removing a Memory Module Installing the Memory Modules Memory Card General Description of OptionsPF-500, PF-510 Paper Feeder Reading the Memory Card Hard Disk Base CA-500 USB Memory Options Computer Interface Computer InterfaceInterface USB Interface Network Interface Interface Signals SpecificationsInterface USB Interface Network Interface Features EMI Countermeasures Operation Environment10 to 35 C 50 to 95 F, 20-80 % RH condensation-free Description FS-C5100DN FS-C5200DN FS-C5300DN Specifications ISO B5, A6, Envelope C5, 16K, and Custom Paper Sizes CassetteFolio, Youkei 2, Youkei 4, 16K, and Custom MP Tray Description FS-C5100DN FS-C5200DN FS-C5300DN Specifications Glossary Sleep mode NetBEUI NetBIOS Extended User InterfaceIP Address Internet Protocol Address MP Tray Subnet Mask StatusTCP/IP Transmission Control Protocol/Internet Protocol USB Universal Serial Bus Glossary-4 Index-1 Index Paper Index-2 Index-3 Timer Index-4 Page Page Version 1.1