Kyocera FS-C5300DN, FS-C5200DN, FS-C5100DN manual Change Password Administrator Password change

>Change Password

****************

>Change Password _

Change Password (Administrator Password change)

You can use this to change the administrator password.

1In step 3 in Password (Administrator Password input) above, press U or V while the Admin (Change) screen is displayed until >Change Password appears.

IMPORTANT The administrator password is not displayed.

2Press [OK]. A blinking cursor (_) appears.

OK?

010

3Press U or V to increase or decrease, respectively, the value at the blinking cursor. Enter the password to be changed. Use Y and Z to move the cursor right and left. Enter a password consisting of between 0 and 16 numbers.

4Press [OK]. A confirmation screen appears. (E.g.: Where the administrator password is changed to 010)

5Press [OK]. The new administrator password is confirmed.

6Press [MENU]. The display returns to Ready.

Using the Operation Panel 6-77