>>EcoPrint Mode ? Off

EcoPrint Mode (Selecting the EcoPrint mode)

By enabling EcoPrint mode, you can minimize the amount of toner used during printing. Because images printed in this mode may be slightly coarser than those printed in standard resolution, you should use EcoPrint for test prints or other situations where high-quality prints are not required.

Use the procedure below to select EcoPrint mode. The default setting is Off.

1Press Z while >Print Quality > is displayed.

2Press U or V repeatedly until >>EcoPrint Mode appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

Page Set (Setting pagination)

In Page Set menus, you can set the number of copies, page orientation, and other settings regarding pagination.

The options available in Page Set are as follows:

Copies (Number of copies)

Orientation (Print orientation)

Wide A4 (Wide A4 pitch)

>Page Set

>

1Press Z while Print Settings > is displayed.

2Press U or V repeatedly until >Page Set > appears.

>>Copies

001

Copies (Number of copies)

You can set the number of copies of each page to be printed for the current interface.

1Press Z while >Page Set > is displayed.

2Press U or V repeatedly until >>Copies appears.

3Press [OK]. A blinking cursor (_) appears.

4Press U or V to increase or decrease, respectively, the value at the blinking cursor. The number of copies can be set between 1 and 999. Use Y and Z to move the cursor right and left.

5When the desired size is displayed, press [OK].

6Press [MENU]. The display returns to Ready.

6-40

Using the Operation Panel

Page 131
Image 131
Kyocera FS-C5100DN EcoPrint Mode ? Off, EcoPrint Mode Selecting the EcoPrint mode, Set Setting pagination, Copies 001