>>Sleep Timer 030min.

Sleep Timer (Sleep timer timeout time)

You can adjust the length of time the printer waits before entering Auto Sleep in the absence of data.

The printer reverts to normal operation mode when the printer receives a print job, the operation panel is operated, or one of the exterior covers is opened. The default time is 30 minutes.

Note Color calibration is automatically executed before the printer reverts to normal operation mode.

1Press Z while >Timer > is displayed.

2Press U or V repeatedly until >>Sleep Timer appears.

3To change the timeout time, press [OK]. A blinking cursor (_) appears.

4Press U or V to increase or decrease the value at the blinking cursor and set the desired time. The timer can be set between 1 and 240 min. Use Y and Z to move the cursor right and left.

5Press [OK].

6Press [MENU]. The display returns to Ready.

6-56

Using the Operation Panel

Page 147
Image 147
Kyocera FS-C5300DN, FS-C5200DN, FS-C5100DN manual Sleep Timer 030 min, Sleep Timer Sleep timer timeout time