6-38 Using the Operation Panel
Emulation (Setting the emulation)
You can change the emulation mode for the current interface. Use the
procedure below to select the mode.
1Press Z while Print Settings > is displayed.
2Press U or V repeatedly until >Emulation > appears on the
message display. One of the emulation modes appears, indicating
the emulation currently in use.
3Press [OK]. A blinking question mark (?) appears.
4Press U or V repeatedly until the desired emulation mode is
displayed.
PCL 6
KPDL
KPDL (AUTO)(default)
5Press [OK].
6Press [MENU]. The display returns to Ready.
Error Report (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during
KPDL emulation. The default is On — the printer does not print KPDL
errors.
1Press Z while Print Settings > is displayed.
2Press U or V repeatedly until >Emulation > appears.
3Press [OK]. A blinking question mark (?) appears.
4Select KPDL or KPDL (AUTO) using U or V. Press [OK].
5Press Z. >>Error Report appears.
6Press [OK]. A blinking question mark (?) appears.
7Select On or Off using U or V. Press [OK].
8Press [MENU]. The display returns to Ready.
>Emulation
? KPDL (AUTO)
>Emulation
? PCL 6
>Emulation >
? KPDL (AUTO)
>>Error Report
? On