Kyocera FS-C5200DN, FS-C5300DN, FS-C5100DN manual Security, ID Administrator ID input

Security >

ID

_

Security

The security functions can be set up to protect printer operation and the print data.

The options available in Security are as follows:

•ID (Administrator ID input)

•Password (Administrator password input)

•I/F Block (Interface (external device) block setting)

•NetWare (NetWare setting)

•AppleTalk (AppleTalk setting)

•IPP (IPP setting)

•SSL Server (SSL Server setting)

•IPSec (IPSec setting)

•Security Level (Security Level setting)

1Press [MENU].

2Press U or V repeatedly until Security > appears.

ID (Administrator ID input)

To use the Security function, you must enter an administrator ID. For information on how to set the administrator ID, refer to Admin (Administrator settings) on page 6-75.

1Press Z while Security > is displayed.

2The message display shows ID and a blinking cursor (_).

3Press U or V to increase or decrease, respectively, the value at the blinking cursor. Enter the specified ID. Use Y and Z to move the cursor right and left. Enter an ID consisting of between 1 and 16 numbers.

4Press [OK]. Proceed to the next step Password (Administrator Password input).

6-60 Using the Operation Panel