Kyocera FS-C5300DN, FS-C5200DN, FS-C5100DN manual Type Adjust Creating custom paper type

>Type Adjust >

? PLAIN

Type Adjust (Creating custom paper type)

The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the paper type for a paper source.

The paper weight and duplex path can be set (refer to Paper Weight (Setting the paper weight) on page 6-33, and Duplex Path (Setting the duplex path) on page 6-33) after selecting the paper type to be customized as follows. For how to reset the customized settings, refer to Reset Type Adjust (Resetting the custom paper type) on page 6-33.

1Press Z while Paper Settings > is displayed.

2Press U or V repeatedly until >Type Adjust > appears.

3Press [OK]. A blinking question mark (?) appears.

4Press U or V to display the desired paper type. The display changes as shown below.

PLAIN

TRANSPARENCY

PREPRINTED

LABELS

BOND

RECYCLED

VELLUM

ROUGH

LETTERHEAD

COLOR

PREPUNCHED

ENVELOPE

CARDSTOCK

COATED

THICK

HIGH QUALITY

CUSTOM 1 (to 8)

5Press [OK].

6Press Z and proceed to the next step Paper Weight (Setting the paper weight).

6-32 Using the Operation Panel