Kyocera FS-C5200DN, FS-C5300DN manual Agenda Copies Agenda Delete, Job Box Configuration Quick Copy

>Agenda

Copies 001

>Agenda Delete

Deleting a Private/Stored Job

You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off after printing, but jobs saved using Stored Job will not be deleted automatically.

1Follow steps 1 through 6 in the above section.

2When the title of the job to be printed is displayed (Agenda, in this example), press [OK]. Enter the four-digit access code entered in the printer driver and press [OK].

3Press V repeatedly until Delete appears for the number of copies.

>Job Box	>
Configuration

>>Quick Copy

32

4Press [OK]. The private job is deleted.

Job Box Configuration

This allows you to change the number of print jobs that can be stored on the hard disk and disk capacity allocated to each function.

Changing the Maximum Number of Quick Copy

This changes maximum number of Quick Copy from 0 to 50. The default is 32.

1Press Z while Job Box > is displayed.

2Press U or V repeatedly until >Job Box Configuration > appears.

3Press Z.

4Press U or V repeatedly until >>Quick Copy appears.

>>Quick Copy

32

5Press [OK]. A blinking cursor (_) appears.

6Press U or V to increase or decrease the value at the blinking cursor. The value can be set between 0 and 50. Use Y and Z to move the cursor right and left.

7When the desired maximum number of jobs is set, press [OK].

8Press [MENU]. The display returns to Ready.

6-24 Using the Operation Panel