Kyocera FS-C5200DN Copies 010 Paper Source ? Cassette Remove Device ?, Copies Number of copies

Copies

010

Paper Source ? Cassette 1

Paper Source ? Cassette 2

>Remove Device ?

Copies (Number of copies)

Sets the number of copies printed of the specified file in USB memory.

1While Copies in step 5 above is displayed, press U and V or Y and Z to display the number of copies. (E.g.: 10)

2Press [OK]. Paper Source and a question mark (?) appears.

Paper Source (Selecting the paper feed source)

Sets the paper used for printing the specified file in USB memory.

1While Paper Source in step 2 above is displayed, press U and V or Y and Z repeatedly until the paper source appears.

(For example : Cassette 2)

Note that menus shown in the list may vary depending on which optional units installed in the printer.

2Press [OK]. The message Processing appears and the printer prints a file stored in a USB memory.

Remove Device (Removing the USB memory)

Specifies the setting for USB memory removal.

1Press Z while USB Memory > is displayed.

2Press U or V repeatedly until >Remove Device appears.

3Press [OK]. A question mark (?) appears.

4Press [OK] again. Menu display ends and the USB memory device can be removed.

>Print

File List ?

Print File List (Printing a list of the files on a USB memory)

This allows you to print a list of the files on a USB memory device.

1Press Z while USB Memory > is displayed.

2Press U or V repeatedly until >Print File List appears.

3Press [OK]. A question mark (?) appears.

4Press [OK] again. The message Processing appears and the printer prints a list of files stored in a USB memory.

6-18 Using the Operation Panel