English

CHAPTER 6 TROUBLESHOOTING

CHAPTER 6

TROUBLESHOOTING

ALARM INDICATIONS AT A GLANCE

Operator Calls

If an error occurs, the printer indicates an ‘operator call’ by blinking the

ALARM lamp and any of the following lamps.

Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the switches as described below.

Blinking Lamp

Error

PAPER ↔●

Paper jam

ALARM↔●

 

 

Paper empty

 

Mis Feed

 

 

COVER ↔●

Cover open

ALARM↔●

 

 

 

TONER ↔●

Toner low

ALARM↔●

 

( every 5 seconds)

 

TONER ↔●

Toner Empty

ALARM↔●

 

Action

Clear the paper jam referring to the next section “PAPER JAMS” and press the FF/CONT switch if the printer does not automatically resume printing.

Load paper into the printer referring to Chapter 2 and press the FF/CONT switch.

Reinstall the paper and press the FF/CONT switch.

Close the top cover of the printer or press firmly on the multi-purpose sheet feeder to make sure it is properly installed.

Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty.

Replace the toner cartridge with a new one.

OFF ON

6–1

Page 59
Image 59
Brother HL-660 manual Alarm Indications AT a Glance, Operator Calls