USER’S GUIDE
4–6
English
3 Unpack the SIMM and hold it on its edge.
✒ Note
Do not touch the memory chips and the surface of the main controller
board. If static electricity collects, it damages the memory.
4 Install the size of SIMM as you need into the slot and push gently
until it clicks into place.
Fig. 4-5 Install the SIMM
5 Install the main controller board into the printer by sliding it into the
guide rails.
6 Secure the main controller board with the three screws.
7 Reconnect the interface cable from your computer and plug the power
cord into the AC outlet.