Brother HL-660 manual Parallel Interface Specification

English

APPENDICES

PARALLEL INTERFACE SPECIFICATION

Interface Connector					Printer Side: Amphenol 57RE-4036-7308 or equivalent
						A shielded cable should be used.
Pin Assignment
	Pin No.				Signal	Direction	Pin No.			Signal	Direction
1						Input	19		0V (S.G.)		–
		DATA STROBE
2					DATA 1	Input	20		0V (S.G.)		–
3					DATA 2	Input	21		0V (S.G.)		–
4					DATA 3	Input	22		0V (S.G.)		–
5					DATA 4	Input	23		0V (S.G.)		–
6					DATA 5	Input	24		0V (S.G.)		–
7					DATA 6	Input	25		0V (S.G.)		–
8					DATA 7	Input	26		0V (S.G.)		–
9					DATA 8	Input	27		0V (S.G.)		–
10						Output	28		0V (S.G.)		–
				ACKNLG
11					BUSY	Output	29		0V (S.G.)		–
12					PE	Output	30		0V (S.G.)		–
13					SLCT	Output	31				Input
								INPUT PRIME
14						Input	32				Output
			AUTO FEED							FAULT
15					N.C.	–	33			N.C.	–
16					0V (S.G.)	–	34			N.C.	–
17					0V (S.G.)	–	35			N.C.	–
18					+5V	–	36				Input
									SLCT IN

✒Note

To use bi-directional communication, an interface cable which has the pin connection above should be used.

Appendix–3