USER’S GUIDE
6–8
English
Questions Recommendation
The printer prints, but it
prints incorrect
information. Sometimes it
prints a couple of
characters and then ejects
the page, etc.
This is an indication that your application printer
emulation setting and the printer’s emulation do
not match. Check in your application software to
see which printer you have selected and to make
sure the printer is set up correctly. Remember this
printer emulates three widely used printer
selections : HP LaserJet 4, Epson FX-850, and
IBM Proprinter XL. A suggestion is to reset the
printer to factory settings by using the RESET
switch or by using the RPC to set the printer into
HP emulation and then select the HP LaserJet 4
printer in your application software.
The printer does not print
when I press the Print
Screen Key.
(DATA lamp On)
Press the SELECT switch to turn the printer off-
line and press the FF/CONT switch. The data has
been sent to the printer but the printer did not
receive the Page Eject command (print screens do
not send this command.)
The printer prints the first
part of my document but
doesn’t print the last page.
(DATA lamp On)
This was a common problem with database
software and spreadsheet software when not
correctly set up. The data has been sent to the
printer but the printer did not receive the Page
Eject command. Press the SELECT switch to turn
the printer off-line and press the FF/CONT switch
to eject the page. Then check with your software
supplier on how to add a Page Eject ( or Form
Feed) command to the end of your print job.
How can I change the User
settings or default settings
of the printer?
Use the remote printer console (RPC) program.
Setting up the Printer for Windows
Questions Recommendation
The printer does not
work. Check the followings:
• The printer is plugged in.
• The interface cable is securely connected
between the printer and computer.
• There are no alarm conditions (blinking
lamps.)