English

USER’S GUIDE

Questions

I cannot print from my application software.

Recommendations

Check the PORT selection within the Chooser : it should match the port you physically attached the printer cable to.

Check the printer cable type (you should be using a Local-Talk type cable.)

Paper Handling

Questions

Recommendations

The printer does not load

Note if the ALARM and PAPER lamps are

paper.

blinking. If so, the multi-purpose sheet

 

feeder is out of paper. Load a new stack of

 

paper into the feeder.

 

If there is paper in the multi-purpose sheet

 

feeder, make sure it is straight. If the paper

 

is curled, you should straighten it before

 

printing.

 

Reduce the stack of paper in the multi-

 

purpose sheet feeder, then try again.

The printer does not load

When the MANUAL lamp is blinking, press the

paper from the manual

FF/CONT switch for manual loading.

feed slot.

Re-insert the paper firmly.

How can I load

You can load envelopes from either the multi-

envelopes?

purpose sheet feeder or the manual feed slot.

 

Your application software must be set up

 

correctly to print on the envelope size you are

 

using. This is usually done in the page setup or

 

document setup menu of your software. Refer to

 

your application manual.

What paper can I use?

You can use plain paper, envelopes,

 

transparencies, labels, and organizer paper. For

 

information on loading paper, see “Paper

 

Handling” in Chapter 2.

How can I clear paper

See “PAPER JAMS” in this chapter.

jams?

 

6–10

Page 68
Image 68
Brother HL-660 manual Paper Handling, Recommendations