Seagate ST360019A Physical characteristics, Seek time, Start/stop times, Power specifications

Models: ST360019A

1 52
Download 52 pages 24.85 Kb
Page 16
Image 16

2.6Physical characteristics

Drive specification

Maximum height

(mm)26.035

(inches) 1.028

Maximum width

(mm)101.6

(inches) 4.00

Maximum length

(mm)146.99

(inches) 5.787

Typical weight

(grams)

635

(pounds)

1.4

2.7Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:

Track-to-track seek time is an average of all possible single-track seeks in both directions.

Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.

Typical seek times (msec)

Read

Write

 

 

 

Track-to-track

<1.0

<1.2

 

 

 

Average

8.5

9.5

 

 

 

Average latency:

4.16

4.16

 

 

 

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet or exceed the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.

2.8Start/stop times

Power-on to Ready (sec)

10 (max)

 

 

Standby to Ready (sec)

10 (max)

 

 

Ready to spindle stop (sec)

20 (max)

 

 

2.9Power specifications

The drive receives DC power (+5V or +12V) through a four-pin standard drive power connector.

6

U Series 9 Product Manual, Rev. D

Page 16
Image 16
Seagate ST360019A manual Physical characteristics, Seek time, Start/stop times, Power specifications