INSTALLATION |
TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-1)
ELECTRICAL INPUT REQUIREMENTS
Voltage Specification
Input Connection Specification
230 VAC single phase, 40 amps
Type
RATED OUTPUT
The Demo Zone is intended for display and demonstration use. It is intended for light duty operation. The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power limitation, power sources (except Ranger 250) when used at maximum output must be operated at low duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.
PHYSICAL DIMENSIONS
HEIGHT | WIDTH | DEPTH | WEIGHT |
53.00 in. | 66.00 in. | 53.00 in. | 1707 lbs. (w/o gas cylinders) |
|
|
| 2467 lbs. (with gas cylinders) |
1346.2 mm | 1676.4 mm | 1346.2 mm | 774.3 kg. (w/o gas cylinders) |
|
|
| 1119.0 kg. (with gas cylinders) |
|
|
|
|
DEMO ZONE
