MAINTENANCE | ||
|
|
|
SAFETY PRECAUTIONS
WARNING
ELECTRIC SHOCK can kill.
•Turn the input power OFF at the disconnect switchs or fuse boxes before working on all equipment.
•Do not touch electrically hot parts.
•Have qualified personnel do all maintenance and troubleshooting work.
•Turn engine or welders off before working inside the machines or servicing the engine.
•Observe all safety precautions in the individual machine Operator’s Manuals as well as this man- ual.
ROUTINE MAINTENANCE
Refer to individual Operator’s Manuals for routine maintenance requirements.
Perform the following daily routine:
•Check that no combustible materials are in the weld- ing or cutting area or around the machine.
•Remove any debris, dust, dirt, or materials that could block the air flow to the machines for cooling.
PERIODIC MAINTENANCE
Refer to individual Operator’s Manuals for periodic maintenance requirements.
Perform the following periodically:
•Inspect the welding cables, torches and electrode holders for any slits or punctures in the cable jacket, or any condition that would affect the proper opera- tion.
•Inspect gas hoses and regulators.
•Inspect gas cylinder chains and fasteners.
•The weld table is insulated from the Demo Zone frame. Inspect the weld table mechanism to ensure that the insulation system is intact.
DEMO ZONE
