Tripp Lite HTR15-2U Features, Specifications, Output, Frequency compatibility, Input

Instruction manual with warranty information

Features

HTR15-2U Pure Sine Wave UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions

1500VA/1200W power handling capacity compatible with control systems, high-definition sources, Audio/Video editing suites, digital consoles, DVD/music/PCs/servers, RAIDs, media centers, PVRs/DVRs, boardrooms, digital processors/EFX, racks and other sensitive electronics

Removes harmonic distortion, fast electrical impulses, frequency variations and other hard-to-solve power problems not addressed by other UPS types

Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values

2 switchable load banks (2 outlets each) enable remote outlet management for load shedding or remote reboot of individual devices from anywhere in the world

Single-line tel/DSL/Ethernet surge suppression

Internal battery set offers 18 min. runtime at half load (600W) and 8 min. at full load (1200W)

Optional BP48V60RT3U external battery pack increases runtime to 155 min. at half load (600W) and 72 minutes at full load (1200W); multi-pack compatible

Optional BP48V24-2U external battery pack increases runtime to 75 min. at half load (600W) and 34 min. at full load (1200W); limit 1 Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance

Compact rackmount form factor installs in 2 rack spaces (2U) with a maximum installed depth of only 19 in.

Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software

HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X and Linux

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and email notification, event logging and running user-defined script commands

Front panel LEDs offer current monitoring and battery charge level information

UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required $250,000 Ultimate Lifetime Insurance (USA and Canada Only)

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

Output Watt Capacity (watts)

Nominal Output Voltage(s) Supported

Frequency compatibility

Frequency compatibility details

Output voltage regulation (line mode)

1500

1200

100V; 110V; 120V

50/60 Hz (auto-selectable)

Output frequency matches input nominal on startup

+/- 2%

Built-in UPS output receptacles

Built-in controllable switched load banks

INPUT

6 5-15R outlet(s)

Two controllable 5-15R load banks (bank 1 - two outlets, bank 2 - four outlets)

Rated input current (at maximum load)

12A