Harbor Freight Tools 66399 Functional Description, Initial Tool Set Up Assembly, Specifications

4.Only use with accessories rated to handle the forces exerted by this tool during operation. Other accessories not designed for the forces gener- ated may break and forcefully launch pieces.

5.Attach all accessories properly to the tool before connecting the air sup- ply. A loose accessory may detach or break during operation.

Vibration Precautions

This tool vibrates during use. Re- peated or long-term exposure to vibra- tion may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

Anyone using vibrating tools regu- larly or for an extended period should first be examined by a doctor and then have regular medical check- ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, ner- vous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as pos- sible.

WARNING! The metal parts of the compressor and hoses will become hot during use.

Save these instructions.

Functional Description

Specifications

Maximum Air Pressure	115 PSI
Speed	Fills Car Tire in Approx.
	3 Minutes
Air Flow	1.3 SCFM @ 40 PSI
	0.9 SCFM @ 90 PSI
Rated Air Pressure	0-115
Maximum Power	12VDC, 30 AMPS
Permanently Lubricated	Do not add oil or any
	other lubricant

Initial Tool Set Up/

Assembly

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as pos- sible.

•This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.

Note: Air flow, and therefore tool perfor- mance, can be hindered by under- sized air supply components.

SKU 66399 For technical questions, please call 1-800-444-3353. Page 5