Cabletron Systems 9033073 manual RoamAbout Cable Assembly, Table C-2 Cable Assembly Specifications

The Antenna Cabling System

RoamAbout Cable Assembly

RoamAbout Cable Assembly

The RoamAbout Cable Assembly is a proprietary cable used to connect the RoamAbout PC Card to a RoamAbout outdoor antenna system. This cable is included in the RoamAbout Outdoor Kit.

One end of the cable has a proprietary connector which is connected to the RoamAbout PC Card.

The N-Type connector at the opposite end of the cable matches the polarity of the N-connectors of the other components that are part of your outdoor antenna cabling system, subject to the country where the RoamAbout Outdoor Kit and/or Cable Assembly was purchased.

Table C-2 Cable Assembly Specifications

Mechanical

Length		50 cm (19.5 in)
Connectors1
•	FCC Countries	Reverse Polarity-N (Female)
•	ETSI Countries	Standard-N (Male)
•	France	Standard-N (Male)
•	Japan	Standard-N (Male)

Operating Temperature	-40°C to +85°C (-40°F to +185°F)
Electrical
Frequency Range	800-2500 MHz
Insertion Loss	0.9 dB

1See Selecting the Correct Connector Type on page C-1.

C-4 Outdoor Antenna Installation Guide